›› 2010, Vol. 22 ›› Issue (3): 0-373.

• 论文 •    

一种多用途采摘机器人末端执行器的设计

居洪玲,姬长英*   

  1. 南京农业大学 工学院,江苏 南京 210031
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2010-05-25 发布日期:2010-05-25

Design of an end-effector for a multi\|use picking robot

JU Hong-ling;JI Chang-ying*   

  1. Engineering College, Nanjing Agricultural University, Nanjing 210031,China
  • Received:1900-01-01 Revised:1900-01-01 Online:2010-05-25 Published:2010-05-25

摘要: 我国水果种植面积广大,采摘任务繁重,急需机械代替人工。目前出现的末端执行器均为一对一采摘,为此,设计了一种适合采摘两种水果、且有一定自适应能力的收获机器人末端执行器。该末端执行器采用三指对中定心外夹持采摘方式,预设采摘对象为苹果和梨,具有体积小巧、操作简单、安全可靠、适应性强、成本低廉等特点。研究证明,此末端执行器能够很好完成采摘任务。

关键词: 采摘机器人, 末端执行器, 多用途, 拧断

Abstract: It is necessary to replace manual working by machinery in fruit picking in our country because of the large planting areas and onerous task of harvesting. The current end-effectors were one-to-one picking, thus a new kind of end-effector of picking robot has been designed, which was suitable for picking two kinds of fruits and showed self\|adaptive ability. This end-effector used three fingers centering gripper jaws for apple and pear harvesting, and had the features of small size, simple operation, safe and reliable, adaptable, low cost and so on. The experiments showed that this end-effector could complete picking tasks well.

Key words: picking robot, end-effector, multi-use, wring