[1] 唐湘如, 罗锡文, 黎国喜, 等. 精量穴直播早稻的产量形成特性[J]. 农业工程学报, 2009, 25(7): 84-87. TANG X R, LUO X W, LI G X, et al.Yield formation characteristics of precision hill-drop drilling early rice[J]. Transactions of the Chinese Society of Agricultural Engineering, 2009, 25(7): 84-87. (in Chinese with English abstract) [2] 孙永健, 郑洪帧, 徐徽, 等. 机械旱直播方式促进水稻生长发育提高产量[J]. 农业工程学报, 2014, 30(20): 10-18. SUN Y J, ZHENG H Z, XU H, et al.Mechanical dry direct-sowing modes improving growth, development and yield of rice[J]. Transactions of the Chinese Society of Agricultural Engineering, 2014, 30(20): 10-18. (in Chinese with English abstract) [3] 翟建波, 夏俊芳, 周勇. 气力式杂交稻精量穴直播排种器设计与试验[J]. 农业机械学报, 2016, 47(1): 75-82. ZHAI J B, XIA J F, ZHOU Y.Design and experiment of pneumatic precision hill-drop drilling seed metering device for hybrid rice[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(1): 75-82. (in Chinese with English abstract) [4] 王在满, 黄逸春, 王宝龙, 等. 播量无级调节水稻精量排种装置设计与试验[J]. 农业工程学报, 2018, 34(11): 9-16. WANG Z M, HUANG Y C, WANG B L, et al.Design and experiment of rice precision metering device with sowing amountstepless adjusting[J]. Transactions of the Chinese Society of Agricultural Engineering, 2018, 34(11): 9-16.(in Chinese with English abstract) [5] 罗锡文, 刘涛, 蒋恩臣, 等. 水稻精量穴直播排种轮的设计与试验[J]. 农业工程学报, 2007, 23(3): 108-112. LUO X W, LIU T, JIANG E C, et al.Design and experiment of hill sowing wheel of precision rice direct-seeder[J]. Transactions of the Chinese Society of Agricultural Engineering, 2007, 23(3): 108-112.(in Chinese with English abstract) [6] 张明华, 罗锡文, 王在满, 等. 水稻直播机组合型孔排种器设计与试验[J]. 农业机械学报, 2016, 47(9): 29-36. ZHANG M H, LUO X W, WANG Z M, et al.Design and experiment of combined hole-type metering device of rice hill-drop drilling machine[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(9): 29-36.(in Chinese with English abstract) [7] 张国忠, 张沙沙, 杨文平, 等. 双腔侧充种式水稻精量穴播排种器的设计与试验[J]. 农业工程学报, 2016, 32(8): 9-17. ZHANG G Z, ZHANG S S, YANG W P, et al.Design and experiment of double cavity side-filled precision hole seed metering device for rice[J]. Transactions of the Chinese Society of Agricultural Engineering, 2016, 32(8): 9-17.(in Chinese with English abstract) [8] 刘彩玲, 宋建农, 王清旭, 等. 气吸辊式水稻精量直播排种器的设计与试验研究[J]. 中国农业大学学报, 2012, 17(2): 134-138. LIU C L, SONG J N, WANG Q X, et al.Design and experimental research of air-suction roller rice precision direct seed-metering device[J]. Journal of China Agricultural University, 2012, 17(2): 134-138.(in Chinese with English abstract) [9] 邢赫, 臧英, 王在满, 等. 水稻气力式排种器分层充种室设计与试验[J]. 农业工程学报, 2015, 31(4): 42-48. XING H, ZANG Y, WANG Z M, et al.Design and experiment of stratified seed-filling room on rice pneumatic metering device[J]. Transactions of the Chinese Society of Agricultural Engineering, 2015, 31(4): 42-48.(in Chinese with English abstract) [10] 王在满, 罗锡文, 黄世醒, 等. 型孔式水稻排种轮充种过程的高速摄像分析[J]. 农业机械学报, 2009, 40(12): 56-61. WANG Z M, LUO X W, HUANG S X, et al.Rice seeds feeding process in cell wheel based on high-speed photography technology[J]. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(12): 56-61.(in Chinese with English abstract) [11] 王朝辉. 气吸滚筒式超级稻育秧播种器的基本理论及试验研究[D]. 长春: 吉林大学, 2010. WANG Z H.Research of theory and experiment on air suction cylinder device for tray nursing seedling of super-rice[D]. Changchun: Jilin University, 2010.(in Chinese with English abstract) [12] 张国忠, 罗锡文, 臧英, 等. 水稻气力式排种器群布吸孔吸种盘吸种精度试验[J]. 农业工程学报, 2013, 29(6): 13-20. ZHANG G Z, LUO X W, ZANG Y, et al.Experiment of sucking precision of sucking plate with group holes on rice pneumatic metering device[J]. Transactions of the Chinese Society of Agricultural Engineering, 2013, 29(6): 13-20.(in Chinese with English abstract) [13] 朱德泉, 李兰兰, 文世昌, 等. 滑片型孔轮式水稻精量排种器排种性能数值模拟与试验[J]. 农业工程学报, 2018, 34(21): 17-26. ZHU D Q, LI L L, WEN S C, et al.Numerical simulation and experiment on seeding performance of slide hole-wheel precision seed-metering device for rice[J]. Transactions of the Chinese Society of Agricultural Engineering, 2018, 34(21): 17-26. (in Chinese with English abstract) [14] 李兰兰, 朱德泉, 张顺, 等. 滑片型孔轮式水稻精量穴直播排种器设计与试验[J]. 浙江农业学报, 2018, 30(12): 2153-2160. LI L L, ZHU D Q, ZHANG S, et al.Design and experiment of slider-hole-wheel precision hill-direct-seeding metering device for rice[J]. Acta Agriculturae Zhejiangensis, 2018, 30(12): 2153-2160.(in Chinese with English abstract) [15] 雷小龙, 杨文浩, 刘礼阳, 等. 杂交稻气送式集排器成穴供种装置设计与试验[J]. 农业机械学报, 2018, 49(11): 65-74. LEI X L, YANG W H, LIU L Y, et al.Design and experiment of seed hill feeding device in pneumatic centralized metering device for hybrid rice[J]. Transactions of the Chinese Society of Agricultural Machinery, 2018, 49(11): 65-74. (in Chinese with English abstract) [16] 张顺, 夏俊芳, 周勇, 等. 气力滚筒式水稻直播精量排种器的设计与试验[J]. 农业工程学报, 2015, 31(1): 11-19. ZHANG S, XIA J F, ZHOU Y, et al.Design and experiment of pneumatic cylinder-type precision direct seed-metering device for rice[J]. Transactions of the Chinese Society of Agricultural Engineering, 2015, 31(1): 11-19.(in Chinese with English abstract) [17] 马成林. 精密播种理论[M]. 长春:吉林科学技术出版社, 1999. [18] 张顺, 夏俊芳, 翟建波, 等. 气力式水稻芽种直播精量排种器关键部件的设计与仿真[J]. 图学学报, 2014, 35(3): 412-416. ZHANG S, XIA J F, ZHAI J B, et al.Design and simulation on the key components of pneumatic precision metering device for direct sowing of rice bud-sowing[J]. Journal of Graphics, 2014, 35(3): 412-416.(in Chinese with English abstract) [19] 邢赫, 臧英, 王在满, 等. 水稻气力式播量可调排种器设计与参数优化[J]. 农业工程学报, 2019, 35(4): 20-28. XING H, ZANG Y, WANG Z M, et al.Design and parameter optimization of rice pneumatic seeding metering device with adjustable seeding rate[J].Transactions of the Chinese Society of Agricultural Engineering, 2019, 35(4): 20-28. (in Chinese with English abstract) [20] 郑天翔, 唐湘如, 罗锡文, 等. 不同灌溉方式对精量穴直播超级稻生产的影响[J]. 农业工程学报, 2010, 26(8): 52-55. ZHENG T X, TANG X R, LUO X W, et al.Effects of different irrigation methods on production of precision hill-direct-seeding super rice[J]. Transactions of the Chinese Society of Agricultural Engineering, 2010, 26(8): 52-55.(in Chinese with English abstract) [21] 邢赫, 王在满, 罗锡文, 等. 气力式水稻穴播机播种精度与田间成苗率关系的试验研究[J]. 农业工程学报, 2018, 34(9): 42-48. XING H, WANG Z M, LUO X W, et al.Experimental study on relationship of seeding precision and germination rate in field of pneumatic rice hill-drop drilling planter[J]. Transactions of the Chinese Society of Agricultural Engineering, 2018, 34(9): 42-48.(in Chinese with English abstract) [22] 张顺, 夏俊芳, 周勇, 等. 气力滚筒式水稻直播精量排种器排种性能分析与田间试验[J]. 农业工程学报, 2017, 33(3): 14-23. ZHANG S, XIA J F, ZHOU Y, et al.Field experiment and seeding performance analysis of pneumatic cylinder-type precision direct seed-metering device for rice[J]. Transactions of the Chinese Society of Agricultural Engineering, 2017, 33(3): 14-23.(in Chinese with English abstract) [23] 左彦军, 马旭, 齐龙, 等. 窝眼窄缝式气吸滚筒排种装置的试验[J]. 农业工程学报, 2010, 26(11): 141-144. ZUO Y J, MA X, QI L, et al.Seeding experiments of suction cylinder-seeder with socket-slot[J]. Transactions of the Chinese Society of Agricultural Engineering, 2010, 26(11): 141-144.(in Chinese with English abstract) [24] XING H, WANG Z M, LUO X W, et al.Design of an active seed throwing and cleaning unit for pneumatic rice seed metering device[J]. International Journal of Agricultural and Biological Engineering, 2018, 11(2): 62-69. |