茶树嫩梢形态与力学特性试验研究

doi:10.3969/j.issn.1004-1524.20230692

浙江农业学报 ›› 2024, Vol. 36 ›› Issue (6): 1425-1435.DOI: 10.3969/j.issn.1004-1524.20230692

茶树嫩梢形态与力学特性试验研究

傅童¹(), 郑航²^,³, 薛向磊²^,³, 叶云翔²^,³, 俞国红²^,³^,^*(), 葛青¹

1.浙江科技学院生物与化学工程学院,浙江杭州310023
2.浙江省农业科学院农业装备研究所,浙江杭州 310021
3.农业农村部东南丘陵山地农业装备重点实验室(部省共建),浙江杭州 310021

收稿日期:2023-05-29 出版日期:2024-06-25 发布日期:2024-07-02
作者简介:傅童(1997—),男,四川遂宁人,硕士研究生,研究方向为智能农机装备设计与制造。E-mail:Zhrory@126.com
通讯作者: *俞国红,E-mail:Yuguohong@163.com
基金资助:
浙江省领雁计划项目(2022C02055);浙江省农业科学院成果推广项目(tg2022016)

Experimental study on morphological and mechanical properties of tea tree shoot tips

FU Tong¹(), ZHENG Hang²^,³, XUE Xianglei²^,³, YE Yunxiang²^,³, YU Guohong²^,³^,^*(), GE Qing¹

1. School of Biological and Chemical Engineering, Zhejiang University of Science and Technology, Hangzhou 310023, China
2. Institute of Agricultural Equipment, Zhejiang Academy of Agricultural Sciences, Hangzhou 310021, China
3. Key Laboratory of Agricultural Equipment for Hilly and Mountainous Areas in Southeastern China(Co-Construction by Ministry and Province), Ministry of Agriculture and Rural Affairs, Hangzhou 310021, China

Received:2023-05-29 Online:2024-06-25 Published:2024-07-02

摘要/Abstract

摘要：

为探明茶树嫩梢芽叶形态分布及采摘部位受力形变规律,进行了嫩梢形态特征参数统计与力学特性试验。首先,以龙井43、中茶108、白叶1号等6类茶树品种为试验对象,分析适采期茶树嫩梢芽叶分布形态特征与采摘农艺要求;其次,对嫩梢进行了物理参数统计,包括各叶片生长基部到嫩梢顶端距离、茶梢茎秆径宽尺寸以及嫩梢含水率等;最后,开展了茶树嫩梢剪切与弯曲力学特性试验。结果表明,茶树嫩梢叶顶距与各茎秆段等效直径呈正态分布。六种茶树样本一、二、三叶位叶顶距分布范围依次为16~22、25~35、40~60 mm。茶梢的一、二、三茎秆段等效直径分别集中在1.2~1.4、1.4~1.6、1.6~2.0 mm范围内,含水率逐渐降低,大致保持在78%~86%。随着由上至下叶位的变化,茎秆的抗弯刚度和剪切应力逐渐增大,不同茶树品种之间存在差异,但变化趋势相似;茶梢茎秆在受压弯曲试验过程中存在压力突变区间,并以龙井43为研究对象,定量分析了嫩梢在下压过程中茎秆采摘部位的力学特征,该研究为进一步了解茶树嫩梢的物理特征和优化设计茶叶采摘装置提供了理论依据。

关键词: 茶, 嫩梢, 物理参数, 力学特性

Abstract:

This study was conducted to investigate the morphological distribution of tea tree shoots and the deformation pattern of harvesting area, and the statistical and mechanical characteristics of shoot morphological parameters were tested. Firstly, six types of tea tree varieties, including Longjing 43, Zhongcha 108 and Baiye 1, were used as test objects to analyze the morphological characteristics of shoot tip distribution and harvesting requirements of tea trees during the harvesting period. Secondly, the physical parameters of the shoot tips, including the distance from the growth base of each leaf to the tip of the shoot, the diameter and width of the stem and the water content of the shoot tips, etc., were analyzed. Finally, experiments on the shear and bending mechanical properties of the shoot tips of tea trees were conducted. The results showed that the leaf tip distance and the equivalent diameter of each stem segment were normally distributed. The distribution of leaf apical spacing at the first, second and third leaf positions of the six tea tree samples ranged from 16 to 22 mm, 25 to 35 mm and 40 to 60 mm, in that order. The equivalent diameters of the first, second and third stem segments of short tips were concentrated in the ranges of 1.2-1.4, 1.4-1.6, 1.6-2.0 mm, respectively, and the water content gradually decreased and remained roughly between 78% and 86%. With the change of leaf position from top to bottom, the bending stiffness and shear stress of the stem gradually increased, and there were differences among different tea tree species, but the change trend was similar; there was a sudden pressure change interval during the bending test of tea tip stem under pressure, and the mechanical characteristics of the stem picked from the young tip during the downward pressure were quantitatively analyzed with Longjing 43 as the research object. The study provides a theoretical basis for further understanding of the physical characteristics of tea tree shoot tips and optimizing the design of tea picking devices.

Key words: tea, shoot tip, physical parameter, mechanical property

中图分类号:

S225.92

傅童, 郑航, 薛向磊, 叶云翔, 俞国红, 葛青. 茶树嫩梢形态与力学特性试验研究[J]. 浙江农业学报, 2024, 36(6): 1425-1435.

FU Tong, ZHENG Hang, XUE Xianglei, YE Yunxiang, YU Guohong, GE Qing. Experimental study on morphological and mechanical properties of tea tree shoot tips[J]. Acta Agriculturae Zhejiangensis, 2024, 36(6): 1425-1435.

图/表 18

参考文献 21

[1]	梅宇. 2020年中国茶叶产销形势报告[N]. 中华合作时报, 2021-04-20(B02).
[2]	2020年9月中国茶叶出口各国和地区销量统计[J]. 中国茶叶, 2020, 42(12):15.
	Statistics on the sales volume of China tea export countries and regions in September 2020[J]. China Tea, 2020, 42(12): 15. (in Chinese)
[3]	翁蔚. 2020年及2021年上半年中国茶叶市场概况[J]. 中国茶叶, 2021, 43(9): 74-76.
	WENG W. An overview of China’s tea market in 2020 and first half of 2021[J]. China Tea, 2021, 43(9): 74-76. (in Chinese with English abstract)
[4]	闫建伟, 胡冬军, 刘启合, 等. 茶叶理条技术及机械研究进展[J]. 中国农机化学报, 2022, 43(2): 75-83.
	YAN J W, HU D J, LIU Q H, et al. Research progress and development trend of tea stripping technology and machinery[J]. Journal of Chinese Agricultural Mechanization, 2022, 43(2): 75-83. (in Chinese with English abstract)
[5]	黄藩, 王云, 熊元元, 等. 我国茶叶机械化采摘技术研究现状与发展趋势[J]. 江苏农业科学, 2019, 47(12): 48-51.
	HUANG F, WANG Y, XIONG Y Y, et al. Research status and development trend of China’s tea mechanized picking technology[J]. Jiangsu Agricultural Sciences, 2019, 47(12): 48-51. (in Chinese with English abstract)
[6]	周海东. 茶叶机械采摘技术的应用研究[J]. 南方农机, 2022, 53(24): 52-54.
	ZHOU H D. Study on the application of mechanical tea picking technology[J]. China Southern Agricultural Machinery, 2022, 53(24): 52-54. (in Chinese)
[7]	刘利. 基于新型摘穗方法的玉米秸秆物理力学特性的研究[D]. 长春: 吉林大学, 2016.
	LIU L. Study of the physical and mechanical properties of corn ears on new snapping method[D]. Changchun: Jilin University, 2016. (in Chinese with English abstract)
[8]	张宗玲. 新型玉米穗茎联合收获机割台的研制[D]. 北京: 中国农业大学, 2018.
	ZHANG Z L. Study on a new corn combine harvester header for reaping both corn stalk and spike[D]. Beijing: China Agricultural University, 2018. (in Chinese with English abstract)
[9]	张宁, 王东伟, 尚书旗, 等. 芝麻茎秆及蒴果力学特性试验研究[J]. 农机化研究, 2020, 42(9): 181-185.
	ZHANG N, WANG D W, SHANG S Q, et al. Experimental study on mechanical properties of sesame stem and capsule[J]. Journal of Agricultural Mechanization Research, 2020, 42(9): 181-185. (in Chinese with English abstract)
[10]	马晓晓, 李华, 葛云, 等. 番茄钵苗茎秆力学特性试验研究[J]. 农机化研究, 2020, 42(8): 161-167.
	MA X X, LI H, GE Y, et al. Experimental study on mechanical properties of tomato seedling stem[J]. Journal of Agricultural Mechanization Research, 2020, 42(8): 161-167. (in Chinese with English abstract)
[11]	杨铮. 葵花茎秆切割性能试验研究[D]. 呼和浩特: 内蒙古农业大学, 2019.
	YANG Z. Experimental study on the cutting performance of sunflower stalk[D]. Hohhot: Inner Mongolia Agricultural University, 2019. (in Chinese with English abstract)
[12]	侯俊铭, 李金澎, 何涛, 等. 蓖麻蒴果力学特性试验及仿真研究[J]. 沈阳农业大学学报, 2018, 49(5): 574-583.
	HOU J M, LI J P, HE T, et al. Experimental and finite element analysis of mechanical properties of castor fruit[J]. Journal of Shenyang Agricultural University, 2018, 49(5): 574-583. (in Chinese with English abstract)
[13]	薛运凤, 曹望成. 茶树新梢的弯曲力学特性[J]. 浙江农业大学学报, 1994, 20(1): 43-48.
	XUE Y F, CAO W C. Mechanical properties of tea young shoot under bending[J]. Journal of Zhejiang University(Agriculture and Life Sciences), 1994, 20(1): 43-48. (in Chinese)
[14]	林燕萍, 金心怡, 郝志龙, 等. 茶树嫩梢力学特性与粗纤维试验[J]. 茶叶科学, 2013, 33(4): 364-369.
	LIN Y P, JIN X Y, HAO Z L, et al. Experiment on mechanical properties and crude fiber of tea leaf[J]. Journal of Tea Science, 2013, 33(4): 364-369. (in Chinese)
[15]	程道南. 茶叶采摘标准及技术[J]. 现代农业科技, 2013(23): 93, 95.
	CHENG D N. Tea picking standards and techniques[J]. Modern Agricultural Science and Technology, 2013(23): 93, 95. (in Chinese)
[16]	王秀铿, 黄仲先, 朱树林. 机采茶树采摘适期的研究[J]. 茶叶通讯, 1986(4):14-18.
	WANG X K, HUANG Z X, ZHU S L. Research on the right time of picking tea trees by machine[J]. Tea Communications, 1986(4):14-18. (in Chinese)
[17]	张曼玲, 郭鸣灏, 陈东红. 不同食品中水分测定方法探讨[J]. 现代农业科技, 2009(21): 291-293.
	ZHANG M L, GUO M H, CHEN D H. Discussion on the methods of moisture determination in different food[J]. Modern Agricultural Science and Technology, 2009(21): 291-293. (in Chinese with English abstract)
[18]	陈寿松, 占杨, 郑功宇, 等. 茶叶含水率常用测定方法及比较分析[J]. 中国茶叶加工, 2013(3): 33-36.
	CHEN S S, ZHAN Y, ZHENG G Y, et al. Common determination methods and comparative analysis for moisture content of tea[J]. China Tea Processing, 2013(3): 33-36. (in Chinese with English abstract)
[19]	张燕青. 杂粮作物机械收获茎秆切割力学特性试验研究[D]. 太谷: 山西农业大学, 2019.
	ZHANG Y Q. Experimental study on cutting mechanical properties of coarse cereals stem related to mechanical harvest[D]. Taigu: Shanxi Agricultural University, 2019. (in Chinese with English abstract)
[20]	İNCE A, UĞURLUAY S, GÜZEL E, et al. Bending and shearing characteristics of sunflower stalk residue[J]. Biosystems Engineering, 2005, 92(2): 175-181.
[21]	中国农业机械化科学研究院. 农业机械设计手册(下册)[M]. 北京: 中国科学技术出版社, 2007:877-920.

品种 Variety	各叶位平均叶顶距 Average distance between leaf tips at each leaf position			各茎秆段等效直径 Equivalent diameter of each stem segment
品种 Variety	1	2	3	1	2	3
白叶1号 Baiye 1	17.7	25.0	34.6	1.25	1.45	1.64
龙井43 Longjing 43	18.6	26.7	42.5	1.33	1.59	1.87
中茶108 Zhongcha108	17.6	23.9	35.4	1.20	1.47	1.73
银霜 Yinshuang	19.1	29.1	50.4	1.26	1.59	1.97
中茗6号 Zhongming 6	17.7	26.7	48.1	1.12	1.41	1.78
中茗7号 Zhongming 7	18.6	28.9	57.0	1.27	1.62	1.90

品种 Variety	各叶位平均叶顶距 Average distance between leaf tips at each leaf position			各茎秆段等效直径 Equivalent diameter of each stem segment
品种 Variety	1	2	3	1	2	3
白叶1号 Baiye 1	17.7	25.0	34.6	1.25	1.45	1.64
龙井43 Longjing 43	18.6	26.7	42.5	1.33	1.59	1.87
中茶108 Zhongcha108	17.6	23.9	35.4	1.20	1.47	1.73
银霜 Yinshuang	19.1	29.1	50.4	1.26	1.59	1.97
中茗6号 Zhongming 6	17.7	26.7	48.1	1.12	1.41	1.78
中茗7号 Zhongming 7	18.6	28.9	57.0	1.27	1.62	1.90

品种 Variety	一叶位段含水率 Moisture content of the one-leaf segment	二叶位段含水率 Moisture content of the two-leaf segment	三叶位段含水率 Moisture content of the three-leaf segment
白叶1号 Baiye 1	83.33	78.05	76.92
龙井43 Longjing 43	84.31	81.67	78.05
中茶108 Zhongcha 108	85.71	78.26	74.19
银霜 Yinshuang	84.6	79.14	77.7
中茗6号 Zhongming 6	86.05	82.5	79.17
中茗7号 Zhongming 7	85.7	80.05	78.3

品种 Variety	一叶位段含水率 Moisture content of the one-leaf segment	二叶位段含水率 Moisture content of the two-leaf segment	三叶位段含水率 Moisture content of the three-leaf segment
白叶1号 Baiye 1	83.33	78.05	76.92
龙井43 Longjing 43	84.31	81.67	78.05
中茶108 Zhongcha 108	85.71	78.26	74.19
银霜 Yinshuang	84.6	79.14	77.7
中茗6号 Zhongming 6	86.05	82.5	79.17
中茗7号 Zhongming 7	85.7	80.05	78.3

品种 Variety	茎秆段 Stem segment	截面长径 Longitudinal diameter of the cross- section/mm	截面短径 Transverse diameter of the cross- section/mm	截面惯性矩 Moment of inertia of the cross- section/mm⁴	弯曲模量 Flexural modulus/ MPa	抗弯刚度 Bending stiffness/ (MPa·mm⁴)
白叶1号	1	1.27	1.23	0.12	2.07	0.25
Baiye 1	2	1.48	1.45	0.22	3.61	0.79
	3	1.65	1.63	0.35	6.66	2.33
龙井43	1	1.35	1.32	0.15	2.19	0.33
Longjing 43	2	1.61	1.57	0.31	3.75	1.16
	3	1.89	1.86	0.60	5.96	3.58
银霜	1	1.31	1.22	0.12	1.14	0.14
Yinshuang	2	1.53	1.64	0.29	2.74	0.79
	3	2.04	1.92	0.71	5.16	3.66
中茶108	1	1.15	1.03	0.06	2.07	0.12
Zhongcha 108	2	1.38	1.23	0.13	4.89	0.64
	3	1.42	1.35	0.17	9.33	1.59
中茗6号	1	1.20	1.07	0.07	1.85	0.13
Zhongming 6	2	1.46	1.35	0.18	3.33	0.60
	3	1.85	1.71	0.45	5.19	2.34
中茗7号	1	1.32	1.24	0.12	1.53	0.18
Zhongming 7	2	1.68	1.56	0.31	2.26	0.70
	3	1.99	1.82	0.59	4.49	2.65

茶树嫩梢形态与力学特性试验研究

Experimental study on morphological and mechanical properties of tea tree shoot tips

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 18

参考文献 21

相关文章 15

编辑推荐

Metrics

本文评价

品种 Variety	茎秆段 Stem segment	平均切断载荷 Average cutting load/N	最大切断载荷 Maximum cutting load/N	最小切断载荷 Minimum cutting load/N	平均剪切强度 Average shear strength/MPa
白叶1号	1	4.15	5.08	3.39	2.53
Baiye 1	2	7.16	8.69	5.49	4.06
	3	13.54	17.90	10.23	6.44
龙井43	1	4.39	5.54	3.58	3.16
Longjing 43	2	7.42	9.08	5.42	3.73
	3	14.21	18.02	11.85	5.15
银霜	1	3.71	4.40	3.00	2.97
Yinshuang	2	6.71	8.84	5.73	3.41
	3	14.12	15.91	9.26	4.58
中茶108	1	4.20	6.42	2.97	3.72
Zhongcha 108	2	7.19	9.12	5.4	4.20
	3	11.22	14.06	8.51	4.74
中茗6号	1	3.55	4.78	2.2	3.53
Zhongming 6	2	5.42	8.20	3.97	3.52
	3	10.31	18.18	7.02	4.15
中茗7号	1	4.23	5.70	2.57	3.31
Zhongming 7	2	7.44	9.99	5.05	3.62
	3	14.05	18.74	11.12	4.94

[1]	杨春, 梁思慧, 汪安然, 陈娟, 李燕, 林开勤, 密孝增, 乔大河, 陈正武, 郭燕. 五十四份茶树种质的特征性代谢产物含量与耐寒性[J]. 浙江农业学报, 2025, 37(9): 1860-1871.
[2]	刘睿, 王丽娟, 王秋皓, 林旭东, 郭启航, 许多霖, 李文妍. 基于改进YOLOv8s的茶叶病虫害检测[J]. 浙江农业学报, 2025, 37(9): 1933-1942.
[3]	黄伟红, 刘一, 郑富明. 表没食子儿茶素没食子酸酯对葡萄糖淀粉酶的抑制机制[J]. 浙江农业学报, 2025, 37(9): 1951-1957.
[4]	曹永庆, 姚小华, 王开良, 任华东. 普通油茶主要性状的年际稳定性[J]. 浙江农业学报, 2025, 37(8): 1624-1633.
[5]	缪百灵, 陈娟娟, 李亮杰, 楚宗丽, 董向向. 浙江红花油茶CchABCG5基因的功能[J]. 浙江农业学报, 2025, 37(7): 1407-1416.
[6]	邓玉莲, 谭琳, 牛丽, 卢前程, 周玲红, 李桂花, 胡秋龙. 一株茶根腐病拮抗真菌的筛选鉴定与生物学特性研究[J]. 浙江农业学报, 2025, 37(7): 1469-1480.
[7]	刘悦萱, 陈延玲, 张培强, 颜鹏. 茶园土壤酸化及其调控研究进展[J]. 浙江农业学报, 2025, 37(1): 245-254.
[8]	朱艳宇, 于文涛, 高水练, 吕水源, 王攀, 靳宛旻, 贵文静, 林浥, 叶乃兴. 福建安溪茶树种质资源遗传多样性与铁观音衍生品种遗传关系[J]. 浙江农业学报, 2024, 36(7): 1591-1601.
[9]	李慧, 谭晓琴, 唐茜, 杨洋, 陈玮. 疏花对紫嫣茶树产量及品质成分的影响[J]. 浙江农业学报, 2024, 36(7): 1602-1615.
[10]	杨春, 杨代星, 苏胜峰, 梁思慧, 李燕, 郭燕, 乔大河, 密孝增, 陈正武. 贵州两地野生大厂茶嘌呤生物碱与儿茶素组分比较[J]. 浙江农业学报, 2024, 36(6): 1232-1244.
[11]	朱铭敏, 张国平, 谭建军, 孙玲姣, 朱黎, 焦洁. 基于YOLOv5s的轻量级茶叶嫩芽终端检测模型[J]. 浙江农业学报, 2024, 36(6): 1413-1424.
[12]	廖鹏飞, 李琼艳, 罗顺高, 刘敏, 朱红涛, 李继娅, 白红英, 陈海佺, 范永慧, 董占鹏. 家蚕素斑品种菁松的茶斑限性定向转育[J]. 浙江农业学报, 2024, 36(5): 1032-1041.
[13]	黄融, 孟庆鑫, 吴晓漫, 荀利杰, 张俊丽, 董霞, 董坤, 龚雪阳. 两种树龄腾冲红花油茶花梗内生真菌的多样性[J]. 浙江农业学报, 2024, 36(5): 1076-1085.
[14]	王洪成, 白子豪, 徐海浩, 徐凯, 黄阿龙, 王泽恩, 万菲, 张俐楠, 吴立群. 基于提采动作的便携式名优茶鲜叶采摘机[J]. 浙江农业学报, 2024, 36(5): 1161-1172.
[15]	赵邯, 项可心, 刘春菊, 李斌, 李大婧, 李越, 牛丽影, 于蕊. 不同品种桃果实化学组分、微观结构与质地的关系[J]. 浙江农业学报, 2024, 36(12): 2705-2718.